View FAN7631_7225811.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

april 2012 ? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 FAN7631 ? advanced pfm controller for half-bridge resonant converters FAN7631 advanced pulse frequency modulation (pfm) controller for half-bridge resonant converters features ? variable frequency control with 50% duty cycle for half-bridge resonant converter topologies ? high efficiency with zero-voltage-switching (zvs) ? up to 600khz operating frequency ? built-in high-side gate driver ? high gate-driving current: +500ma/-1000ma ? programmable dead time with a resistor ? pulse skipping and burst operation for frequency limit (programmable) at light-load condition ? simple remote on/off cont rol with latch or auto-restart (a/r) using fi or ls pin ? protection functions: over-voltage protection (ovp), overload protection (olp), over-current protection (ocp), abnormal over-current protection (aocp), internal thermal shutdown (tsd), and high precise line under-voltage lockout (luvlo) ? level-change ocp function during startup applications ? pdp and lcd tvs ? desktop pcs and servers ? video game consoles ? adapters ? telecom power supplies description the FAN7631 is a pulse-frequency modulation controller for high-efficiency half-bridge resonant converters that includes a high-side gate drive circuit, an accurate current-controlled oscillator, and various protection functions. the FAN7631 features include variable dead time, operating frequency up to 600khz, protections such as luvlo, and a selectable latch or a/r protection using the ls pin for user convenience. the zero-voltage-switching (zvs) technique reduces the switching losses and improves the efficiency significantly. zvs also reduces the switching noise noticeably, which allows a small electromagnetic interference (emi) filter. offering everything necessary to build a reliable and robust resonant converter, the FAN7631 simplifies designs and improves producti vity and performance. the FAN7631 can be applied to resonant converter topologies such as series resonant, parallel resonant, and llc resonant converters. related resources an4151 ? half-bridge llc resonant converter design using fsfr-series fairchild power switch (fps?) ordering information part number operating junction temperature package packaging method FAN7631sj -40 ? c ~ 130 ? c 16-lead, small-outline package (sop) tube FAN7631sjx tape & reel
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 2 FAN7631 ? advanced pfm controller for half-bridge resonant converters application circuit diagram figure 1. typical application circuit (resonant half-bridge converter) block diagram figure 2. internal block diagram
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 3 FAN7631 ? advanced pfm controller for half-bridge resonant converters pin configuration figure 3. package pin assignments (16sop) pin definitions pin # name description 1 con this pin is used to enable / disable the gate dr ive outputs for pulse-skipp ing operation. when the voltage of this pin is above 0. 6v, the gate drive outputs are enabled . when the voltage of this pin drops below 0.4v, gate drive signal s for both mosfets are disabled. 2 rt this pin programs the switching frequ ency. typically, an opto-coupler is connected to this pin to control the switching frequency for the output voltage regulation. 3 ss this pin is used to program the soft-start time and overload protection delay. it also programs the restart delay when the converter auto recovers from the protection states. typically, a small capacitor is connected on this pin. 4 dt this pin is to adjust the dead time using an external resistor. 5 nc no connection 6 fi user protection function / fault input. this pi n can be used as a latch protection, which is operated when a voltage applied to this pin is higher than 4v dc . 7 sg this pin is the gr ound of the control part. 8 ls this pin senses the line voltage for line under-voltage lockout (luvlo). 9 cs this pin senses the current flowing through t he main mosfet. typically, negative voltage is applied on this pin. 10 pg this pin is the power ground. this pin typica lly connects to the source of the low-side mosfet. 11 lo this pin is used for the low-side gate-driving signal. 12 lv cc this pin is for the supply voltage of the control ic and low-side gate-driving circuit. 13 nc no connection 14 ctr this pin is connected to the drain of the low- side mosfet. typically, a transformer is connected to this pin. 15 ho this pin is used for the high-side gate-driving signal. 16 hv cc this pin is used for the supply voltage of the high-side gate-driving circuit.
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 4 FAN7631 ? advanced pfm controller for half-bridge resonant converters absolute maximum ratings stresses exceeding the absolute maximum ratings may damage the device. the devic e may not function or be operable above the recommend ed operating condit ions. extended exposure to stresses above the recommended operating conditions may affect device reli ability so that any test which is stre ssing the parts to these levels is not recommended. the absolute maximum ratings are stress ratings only. t a =25 ? c unless otherwise specified. symbol parameter min. max. unit hv cc to v ctr high-side v cc pin to center voltage -0.3 25.0 v hv cc high-side floating supply voltage -0.3 625.0 v v ho high-side gate\-driving voltage v ctr -0.3 hv cc +0.3 v v ctr high-side offset voltage hv cc -25 hv cc +0.3 v allowable negative v ctr at 15v dc applied hv cc to ctr pin -9.8 -7.0 v lv cc low-side supply voltage -0.3 25.0 v v lo low-side gate driving voltage -0.3 lv cc v v con control pin input voltage -0.3 lv cc v v cs current sense (cs) pin input voltage -5.0 1.0 v v rt rt pin input voltage -0.3 5.0 v f sw recommended switching frequency 10 600 khz v ls ls pin input voltage -0.3 lv cc v v fi fi pin input voltage -0.3 lv cc v v ss ss pin input voltage -0.3 internally clamped (1) v v dt dt pin input voltage -0.3 internally clamped (1) v dv ctr /dt allowable ctr voltage slew rate 50 v/ns p d total power dissipation 1.24 w t j maximum junction temperature (2) +150 ? c recommended operating junction temperature (2) -40 +130 t stg storage temperature range -55 +150 ? c notes: 1. v ss and v dt are internally clamped at 5.0v, which has a tolerance between 4.75v and 5.25v. 2. the maximum value of the recommended operating ju nction temperature is limited by thermal shutdown. thermal impedance symbol parameter value unit ja junction-to-ambient thermal impedance 102 oc/w
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 5 FAN7631 ? advanced pfm controller for half-bridge resonant converters electrical characteristics t a =25 ? c and lv cc =17v unless otherwise specified. symbol parameter condition min. typ. max. unit supply section i lk offset supply leak age current hv cc =v ctr 50 a i q hv cc quiescent hv cc supply current hv cc,start - 0.1v, v ctr =0v 50 120 a i q lv cc quiescent lv cc supply current lv cc , start - 0.1v, v ctr =0v 100 200 a i o hv cc operating hv cc supply current (rms value) (3) f osc =100khz, c load =1nf, v con > 0.6v, v ctr =0v 3.0 4.5 ma f osc =300khz, c load =1nf, v con > 0.6v, v ctr =0v 8 10 ma f osc =300khz, v con < 0.4v, v ctr =0v (no switching) 100 200 a i o lv cc operating lv cc supply current (rms value) (3) f osc =100khz, c load =1nf v con > 0.6v, v ctr =0v 5 7 ma f osc =300khz, c load =1nf, v con > 0.6v, v ctr =0v 10 14 ma f osc =300khz, v con < 0.4v, v ctr =0v (no switching) 2.6 3.5 ma uvlo section lv cc,start lv cc uvlo turn-on threshold 11.2 12.5 13.8 v lv cc,stop lv cc uvlo turn-off threshold 8.9 10.0 11.1 v lv cc,hys lv cc uvlo hysteresis 2.5 v hv cc,start hv cc uvlo turn-on threshold 8.2 9.2 10.2 v hv cc,stop hv cc uvlo turn-off threshold 7.8 8.7 9.6 v hv cc,hys hv cc uvlo hysteresis 0.5 v oscillator & feedback section v bh pulse skip disable threshold voltage 0.54 0.60 0.66 v v bl pulse skip enable threshold voltage 0.36 0.40 0.44 v v rt regulated rt voltage 1.5 2.0 2.5 v f osc output oscillation frequency r t =11.6k ? , c ss =1nf 48 50 52 khz r t =2.7k ? , c ss =1nf 188 200 212 dc output duty cycle r t =11.6k ? , c load =100pf 49 50 51 % r t =2.7k ? , c load =100pf 48 50 52 soft-start and restart section i ss1 soft-start current 1 v css =0v, lv cc =17v 3 ma i ss2 soft-start current 2 v css =1.6v, lv cc =17v 25 30 35 a v ss_start soft-start start voltage c ss =1nf, v con =3v 1.5 1.6 1.7 v v ss_end soft-start end voltage c ss =1nf, v con =3v 4.0 4.2 4.4 v v ssc clamped soft-start voltage c ss =1nf, v con =3v 4.75 5.00 5.25 v f osc_ss initial output oscillation frequency during soft-start r t =11.6k ? ?? v css =1.6v 300 khz r t =5.8k ? 530 r t =2.7k ? 600 v rt-con rt-con voltage for startup 60 120 mv continued on the following page?
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 6 FAN7631 ? advanced pfm controller for half-bridge resonant converters electrical characteristics (continued) t a =25 ? c and lv cc =17v unless otherwise specified. symbol parameter condition min. typ. max. unit output section i source peak sourcing current lv cc =hv cc =17v, t j =-40 ? c ~ 130 ? c 500 ma i sink peak sinking current hv cc =17v, t j =-40 ? c ~ 130 ? c 1000 ma t r rising time hv cc =17v, c load =1nf 40 ns t f falling time 20 ns v hoh high level of high-side gate signal (v hvcc -v ho ) i o =20ma 1.0 v v hol low level of high-side gate signal 0.6 v v loh high level of low-side gate signal (v lvcc -v lo ) 1.0 v v lol low level of low-side gate signal 0.6 v protection section i olp olp sink current 25 30 35 a v olp olp threshold voltage -0.42 -0.3 7 -0.32 v t bol olp blanking time (3) 150 200 250 ns v ocp ocp threshold voltage -0.62 -0.56 -0.50 v t bo ocp blanking time (3) 150 200 250 ns v aocp aocp threshold voltage -1.21 -1.10 -0.99 v t bao aocp blanking time (3) 50 ns t da delay time (low side) detecting from v aocp to switch off (3) 250 400 ns v ovp lv cc over-voltage protection 21 23 25 v v line line uvlo threshold voltage v ls sweep, -40 ? c ~ 130 ? c 2.88 3.00 3.12 v i line line uvlo hysteresis current v ls =2v 9 10 11 a t sd thermal shutdown temperature (3) 130 140 150 ? c v fi fault input threshold voltage for latch operation 3.8 4.0 4.2 v i lr latch-protection sustain lv cc supply current lv cc =7.5v 100 150 a v lr latch-protection reset lv cc supply voltage 5 v dead-time control section d t dead time r dt =2.7k ? , c load =1nf 100 150 200 ns r dt =18k ? , c load =1nf 250 350 450 short, c load =1nf 50 open, c load =1nf 1000 recommended dead time range 100 600 note: 3. this parameter, although guarantee d, is not tested in production.
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 7 FAN7631 ? advanced pfm controller for half-bridge resonant converters typical performance characteristics these characteristic graphs are normalized at t a =25oc. figure 4. lv cc start voltage vs. temperature figure 5. lv cc stop voltage vs. temperature figure 6. hv cc start voltage vs. temperature figure 7. hv cc stop voltage vs. temperature figure 8. pulse skip disable voltage vs. temperature figure 9. pulse skip enable voltage vs. temperature 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ]
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 8 FAN7631 ? advanced pfm controller for half-bridge resonant converters typical performance characteristics (continued) these characteristic graphs are normalized at t a =25oc. figure 10. regulated r t voltage vs. temperature figure 11. output oscillation frequency (r t =11.6k ? ) vs. temperature figure 12. output oscillation frequency (r t =2.7k ? ) vs. temperature figure 13. output duty cycle (r t =11.6k ? ) vs. temperature figure 14. output duty cycle (r t =2.7k ? ) vs. temperature figure 15. i ss1 vs. temperature 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.70 0.80 0.90 1.00 1.10 1.20 1.30 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ]
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 9 FAN7631 ? advanced pfm controller for half-bridge resonant converters typical performance characteristics (continued) these characteristic graphs are normalized at t a =25oc. figure 16. i ss2 vs. temperature figure 17. f osc_ss (r t =11.6k ? ) vs. temperature figure 18. f osc_ss (r t =2.7k ? ) vs. temperature figure 19. v olp vs. temperature figure 20. i olp vs. temperature figure 21. v ocp vs. temperature 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ]
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 10 FAN7631 ? advanced pfm controller for half-bridge resonant converters typical performance characteristics (continued) these characteristic graphs are normalized at t a =25oc. figure 22. v aocp vs. temperature figure 23. v ovp vs. temperature figure 24. v line vs. temperature figure 25. i line vs. temperature figure 26. v fi vs. temperature figure 27. dead time (d t =150ns) vs. temperature figure 28. dead time (d t =350ns) vs. temperature 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ] 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 -40 -20 0 25 50 75 100 120 normalized temperature [ ( ]
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 11 FAN7631 ? advanced pfm controller for half-bridge resonant converters functional description 1. internal oscillator figure 29 shows the simplified circuit of internal current- controlled oscillator and typical circuit configuration for the rt pin. internally, the voltage on the rt pin is regulated at 2v by the v /i converter. the charging / discharging current for the oscillator capacitor, c t , is obtained by mirroring the curr ent flowing out of the rt pin (i ctc ). by comparing the capacitor voltage with v th and v tl and driving s/r flip-flop with the comparator outputs, the clock signal is obtained. thus, the switching frequency increases as the rt pin current increases. as can be seen in figure 29, an opto-coupler transistor is typically connected to the rt pin through r max to modulate the switching fr equency. during an overload condition, the opto-coupler is fully turned off and i ctc is solely determined by r min , which sets the minimum frequency. meanwhile, the maximum switching frequency is obtained when the opto-coup ler is fully turned on. considering the typical saturation voltage of opto- transistor (0.2v), the maximum frequency can be obtained by r max and r min as: min min max min max 11.6 50 11.6 10.4 ()50 k fkhz r kk f khz rr ? ?? ?? ??? (1) figure 29. current-controlled oscillator 2. gate driver and dead time programming the FAN7631 employs a gate drive circuit with high driving capability (source: 0.5a / sink: 1a) to cover a wide variety of applications. the two gate drive signals (lo and ho) are complimentary; each signal has 50% duty cycle, including the dead time, as shown in figure 30. the dead time can be programmed by the resistor, r dt , as shown in figure 31. internally, the voltage on the dt pin is regulated at 1.4v by the v/i converter and i dt programs the dead time using r dt . to improve the noise immunity of the dead time circuit, a sample-and-hold circuit is internally employed. however, severe noises in a high-power application can affect the dead time circuit operation and it is theref ore recommended to use a bypass capacitor of around 10nf in parallel with the r dt . as a protective measure aga inst abnormal conditions, such as dt pin short-to-ground and lift open, shunt- resistor and series resistor r dt,short and r dt,open are internally connected to the dt pin. even when this pin is shorted to ground and lifted open, the dead time is limited to 50ns (short to ground) and 1000ns (lifted open). since the internal resistors have relatively large tolerance, it is recommended to set the dead time between 150ns and 600ns to minimize the dead time variation by the internal resistor tolerance. figure 30. gate driving signals 0 100 200 300 400 500 600 0 102030405060 dead ? time(ns) dead ? time ? resistor ? (r dt , ? k ? ) figure 31. dead time vs. r dt 3. soft-start since the voltage gain of t he resonant converter is inversely proportional to the switching frequency, the soft-start is implemented by sweeping down the switching frequency from a high initial frequency until the output voltage is established. the current-steering circuit connected to ss pin adaptiv ely changes the sinking and sourcing current of the ss pi n to set soft-start time, olp shutdown delay, and restart time. as illustrated in figure 32, the sourcing current, i ss1 (3ma), is enabled at the beginning of startup, which rapidly raises v ss up to v ss_start (1.6v). then the sourcing current is switched to i ss2 (30a) and gate drive signals are enabled. due to the small value of i ss2 , the ss pin voltage slowly rises, allowing slow decrease of the switching frequency. to minimize the frequency variation while the output capacitance of the opto-transi stor is charged up, soft- start is delayed until the co n pin voltage (opto-coupler transistor voltage) reaches th e rt pin voltage. thus, the ho output dead time time lo output
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 12 FAN7631 ? advanced pfm controller for half-bridge resonant converters initial switching frequency is not affected by r max and is solely determined as six times the minimum switching frequency set by r min as in equation (1). the maximum switching frequency is also internally limited at 600khz. when v ss reaches v ss_end (4.2v), soft-start ends. then, the high threshold of v ct comparator, v th , is clamped at v ss_end while v ss keeps increasing until it reaches v ssc (5v). the soft-start time is given as: 5 2.6 310 ss ss tc ? ? ? (2) figure 32. soft-start waveforms 4. current sensing FAN7631 employs a negative voltage sensing method to sense the drain current of the mosfet. this allows sensing the current without a leading edge spike caused by the low-side mosfet?s driving current. therefore, the resistive-sensing method requir es only a small rc filter. the capacitive-sensing method is also available. 4.1. resistive sensing method the FAN7631 can sense the dr ain current as a negative voltage, as shown in figure 33. an rc filter with a time constant of 1/30~1/ 10 of the operating period is typical. figure 33. resistive sensing 4.2. capacitive sensing method the mosfet drain current can be sensed using an additional capacitor in parallel with the resonant capacitor, as shown in figure 34. while the low-side switch is turned on, the current, i cb , through c b introduces v sense across r sense . the i cb is a fraction of the transformer primary-side current, i p , determined by the current divider with capacitors c r and c b as: bb cb p p rb r cc iii cc c ?? ? (3) generally, 1/100~1/1000 is adequate for the ratio of c b /c r . r d is used as a damper for reducing noise generated by the switching transition. to prevent the damping resistor from affecting the current divider ratio, the resistor should be much smaller than the impedance of c b at the switching frequency, calculated as: 1 2 d sb r f c ? ?? (4) then, v sense can be obtained as: b sense sense p r c vri c ? (5) figure 34. capacitive sensing
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 13 FAN7631 ? advanced pfm controller for half-bridge resonant converters 5. protection circuit the FAN7631 has several self-protective functions: overload protection (olp), over-current protection (ocp), level-change ocp, abnormal over-current protection (aocp), over-voltage protection (ovp), thermal shutdown (tsd), fault input (fi), and line under-voltage lockout (luvlo or also called brownout). level-change ocp, olp, ocp, ovp, and luvlo are auto-restart mode protections while aocp, tsd, and fault input are latch mode protections. once auto-restart protection is triggered, switching is instantly terminat ed and the mosfets remain off. then the FAN7631 keeps attempting to restart after the restart delay until the protection situation is removed. when a latch mode protection is triggered, the FAN7631 remains off until lv cc drops to v lr (5v) and then rises above lv cc,start (12.5v). 5.1. overload protection (olp) when the sensed voltage on the cs pin drops below v olp (-0.37v) for more than olp blanking time, t bol (200ns), c ss starts to be discharged by sinking current i olp . if the sensed voltage on the cs pin does not drop below v olp in the next switching cycle, the current on the ss pin is switched to charging current i ss1 , restoring v ss as illustrated in figure 35. if the cs pin voltage drops below v olp for in next consecutive switching cycle until c ss voltage, v ss , reaches v ss_start (1.6v); olp is triggered and the gate drive si gnals remain off. once the olp is triggered, FAN7631 repeats charging and discharging c ss four times, then restarts. the olp delay, t olp , and self auto-restart time, t ar , are given as: 5 3.4 310 olp ss tc ? ? ? (6) 5 2.6 8 310 ar ss tc ? ?? ? (7) figure 35. overload protection (olp) 5.2. over-current protection (ocp) when the cs pin voltage drops below v ocp (-0.54v) for longer than the oc p blanking time, t bo (200ns), ocp is triggered, terminating switching operation. then, FAN7631 repeats charging and discharging c ss four times before restarting. figure 36. over-current protection (ocp) 5.3. abnormal over-current protection (aocp) if the secondary-side rectifier diodes are shorted, a large current with extremely high di/dt can flow through the mosfet before ocp is triggered. aocp is triggered with a short blanking time of 50ns, t bao , when the sensed voltage drops below -1.10v, terminating the switching operation. once t he protection is triggered, v ss is discharged by an internal switch. since it is a latch mode protection, the protection is reset when lv cc drops to v lr (5v). figure 37. abnormal over-current protection (aocp) 5.4. level-change over-current protection (ocp) even with soft-start, there c an be large overshoot current for the initial several switching cycles until the resonant capacitor voltage reaches it s steady-state value. to prevent the startup failure by ocp, the ocp threshold is changed to v aocp level while the latch mode aocp is disabled during soft-start. figure 38. level-change ocp
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 14 FAN7631 ? advanced pfm controller for half-bridge resonant converters 5.5. over-voltage protection (ovp) when the lv cc reaches 23v, ovp is triggered. this protection is used when auxiliary winding of the transformer is utilized to supply v cc to the FAN7631. 5.6. thermal shutdown (tsd) the thermal shutdown function is integrated to detect abnormal over-temperature, su ch as abnormal ambient temperature rising or over-driving of gate drive circuit. if the junction temperature exceeds t sd (130 ? c), thermal shutdown is triggered in latch mode. 5.7. line-uvlo FAN7631 includes a precise line-uvlo (or brownout) function with programmable hysteresis voltage, as can be seen in figure 39. when the line voltage is recovered, it starts up with soft-start, as shown in figure 39. a hysteresis voltage between the start and stop voltage is programmable by i line and external resistor r1. in normal operation, the comparator?s output is high and i line is disabled i line is activated when the comparator?s output is low, introducing hysteresis. if necessary, c filter can be used to reduce noise interference. generally, hundreds of pico-farad to tens of nano-farad is adequate depending on the level of noise. figure 39. line-uvlo figure 40. line uvlo waveforms the dc link input-voltages for start and stop are calculated as: , 12 2 dl stop line rr vv r ? ?? (8) ,, 1 dl start dl stop line vvir ??? 6. simple remote-on/off the power stage can be shut down with latch mode or auto-restart mode, as shown in figure 41. for the latch mode protection, the fi pin is used, which stops the switching immediately once the voltage on fi pin is pulled above v fi (4v) using an opto-coupler. to configure an external protection with auto-restart mode, an opto- coupler can be used on the ls pin. when voltage on the ls pin is pulled below v line (3v), line uvlo is triggered. when ls pin voltage is pulled high, above 3v, FAN7631 starts up softly. figure 41. external protection circuits (top: latch mode, bottom: a/r mode) 7. skip cycle operation the FAN7631 provides the pulse-skip function to prevent the switching frequency from increasing too much at no- load condition. figure 42 shows the internal block diagram for the control (con) pin and its external configuration. the con pin is typically connected to the collector terminal of the opto-coupler and the FAN7631 stops switching when the con pin voltage drops below 0.4v. FAN7631 resumes switching when the con pin voltage rises above 0.6v. the frequency that causes pulse skipping is given as: min max 5.8 4.6 ()100 skip kk f khz rr ? ? ??? (9) figure 42. pulse-skipping circuit
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 15 FAN7631 ? advanced pfm controller for half-bridge resonant converters 8. pcb layout guideline figure 43 shows the pcb layout guideline to minimize the us age of jumpers. good pcb layo ut improves power system efficiency and reliability and minimizes emi. the power gr ound (pg) and signal ground (sg) should meet at a single point. jumpers should be avoided, es pecially for the ground trace. figure 43. pcb layout guideline
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 16 FAN7631 ? advanced pfm controller for half-bridge resonant converters typical application circuit (half- bridge llc resonant converter) application fairchild device input voltage range rated output power output voltage (rated current) lcd tv FAN7631 400v (20ms hold-up time) 192w 24v-8a features ? high efficiency ( >94% at 400v dc input). ? reduced emi noise through zero-voltage-switching (zvs). ? enhanced system reliability with various protection functions. figure 44. typical application circuit
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 17 FAN7631 ? advanced pfm controller for half-bridge resonant converters typical application circuit (continued) usually, the llc resonant converter requires large leaka ge inductance value. to obtai n a large leakage inductance, sectional winding method is used. ? core: eer3542 (ae=107 mm 2 ) ? bobbin: eer3542 (horizontal) np n s1 n s2 15mm 8mm 2.5mm figure 45. winding specifications table 1. winding specifications pin (s f) wire turns winding method n p 8 1 0.12 30 (litz wire) 45 section winding n s1 12 9 0.1 100 (litz wire) 5 section winding n s2 16 13 0.1 100 (litz wire) 5 section winding pin specification remark primary-side inductance (l p ) 1-8 630 ? h 5% 100khz, 1v primary-side effective leakage (l r ) 1-8 145 ? h 5%. short one of the secondary windings
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 18 FAN7631 ? advanced pfm controller for half-bridge resonant converters physical dimensions figure 46. 16-lead, small-outline package (sop) package drawings are provided as a service to customers consi dering fairchild components. drawings may change in any manner without notice. please note the revision and/or date on the drawi ng and contact a fairchild semiconductor representative to ver ify or obtain the most recent revision. package specifications do not expand the terms of fairchild?s worldwide terms and conditions, specifically the warranty therein, which covers fairchild products. always visit fairchild semiconductor?s online packa ging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ .
? 2011 fairchild semiconductor corporation www.fairchildsemi.com FAN7631 ? 1.0.2 19 FAN7631 ? advanced pfm controller for half-bridge resonant converters

▲Up To Search▲

Price & Availability of FAN7631

	To Download FAN7631 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .